Samsung SyncMaster 933HD Manual

Samsung SyncMaster 933HD Manual

Follow these safety instructions to ensure your safety and prevent property damage. Be sure to read the Samsung SyncMaster 933HD manual instructions carefully and use the product in the right way. When not in use for a long period of time, configure your computer in DPM. If you use the screen saver, set to the active display mode. The images here are for reference only and are not applicable in all cases (or countries). Do not use a power cord or damaged plug or loose or damaged outlet. Do not touch the plug of the power supply with wet hands when removing or plugging the plug into the outlet. Be sure to connect the power cord to a grounded outlet. Make sure that the power plug is plugged into the socket firmly and correctly. Do not bend or pull plug hard nor place any material weighed about the same. Do not connect several devices to the same outlet. Do not disconnect the power cord while using the product. To disconnect the appliance from the mains, the plug should be removed from the socket, so that the mains plug must be easily operable. Use only the power cord provided by our company. Do not use the power cord supplied with other product.

Be sure to contact an authorized service center when installing the monitor in a location with excessive dust, high or low temperatures, high humidity and exposed to substances chemicals and where to run for 24 hours, as in airports, stations train, etc. Doing so may cause serious damage to your monitor. Do not drop the monitor when moving it. Make sure at least two people to lift and move the product. To install the product in a Cabinet or on a shelf, make sure that the front end of the bottom of the product does not protrude. Do not place candles, repellent of mosquitoes, cigarettes and any appliance near the product. Keep so far the cable feed or product heating appliances as possible. Do not install in a place that is poorly ventilated, such as a bookcase or a Cabinet. Place the monitor with care. Install the product in a well-ventilated place. Make sure that there is a space of more than 10 cm from the wall. Bend down outdoor antenna cable in the place where it comes so that rainwater does not flow.

When cleaning the housing of the monitor or TFT-LCD screen surface, clean with a slightly damp, soft tissue. Do not spray cleaner directly on the surface of the product. Only clean the product with a soft cloth with a monitor cleaner. If you must use a different monitor cleaner, dilute with water in a ratio of 1:10. When cleaning the pins of the power supply plug or clean the socket, clean it with a dry cloth. When cleaning the product, be sure to disconnect the power cord. When cleaning the product, disconnect the power cord and gently clean it with a cloth dry. (Do not use chemicals such as benzene, alcohol, wax, thinner, repellent of mosquitoes, lubricant or cleaner). These can change the appearance of the surface of the product and remove the indicator labels on the product. Since the product casing scratches easily, be sure to use only the specified cloth. Use the specified cloth by adding just a bit of water. As the product can be scratched if there is any foreign material in the cloth, be sure to shake well before use.

You can enjoy sound quality from your computer sound card and clear using the monitor speakers. (You don't need to install any separate speaker for your computer). You can get a blank screen depending on the type of video card that you are using if you simultaneously connect the D-sub cables and DVI to a computer. If correctly connected your monitor using the DVI connector but gets a blurred or white screen, check if the status of the monitor is set to analog. Press the 'SOURCE' button to monitor check the input signal source.

 Download Samsung SyncMaster 933HD Manual PDF

Subscribe to receive free email updates: